Grills and Diffusers

Grills

Grills are designed for installation at the wall, floor and ceiling and are recommended for supplying heated, ventilated or cooled air and for return air or exhaust air. Grills are manufactured from high grade Aluminum extruded section with powder coating.

Application

In various industrial & commercial buildings.

Diffusers

Spot Diffusers

Constructed from high grade aluminum extruded sections duly powder coated. Depending upon the ceiling and process can be made flush type, anti smudge and step down.

Application

In various industrial & commercial buildings.

Linear Diffusers

Linear Diffuser guarantees an optimum air distribution of the supply air in the department. Made from Galvanized Steel Sheets, also available with powder coating option.

Application

In Textile Mills.

Loom Cooling Diffuser

Mixed air conditioning is especially suited to create high rates of relative humidity in the processing zone. A certain percentage of air volume is directly blown in with LOOM COOLING DIFFUSER, so that high air humidity can be achieved at warp and weft areas whereas lower humidity levels can be maintained at the production area.These diffusers are fabricated from galvanized steel sheets with filter at the outlet. Volume control damper is provided to throttle the air volume. Powder coating option is also available.

Application

Weaving Mills

Jet Diffuser

Spot Diffusers give optimum performance for supply of air-distribution within large rooms where supply of air via ceiling diffuser is not feasible. The "eye ball" and socket arrangement provides flexibility of setting the air jet to any desired angle within + 40-deg. Manufactured with high grade Aluminum spinning. Supported on flanged Collars with felt lining and provision for fixing with duct.

Application

Shopping Malls, Large Halls, Assembly Shops etc.

Jet Nozzel

Jet diffusers are suitable for wall application for large volume of air handling and longer throw. These have unique feature of setting the device both for diffusion and air Jet. Also the universal Joint type setting allows both Jet / Diffusion in any desired angle. Manufactured from high grade Aluminum Spinning with "Step - Up" ring placement duly powder coated. The pivoted core can rotate by 360 deg with respect to the outer casing.

Application

Rooms / Halls, Shopping Malls, Assembly Halls etc.